01.22
So i wanted to know exactly what my A/D D/A, interfaces, console, & other gear were actually doing to my audio.
I wanted to know how differently my interfaces performed @ different samplerates. I also wanted to see how my analog console/bus comp effected response as well.
Using RightMark Audio Analyzer 6.2.1 PRO I ran calibrated loopback tests.
Some of you might find the results interesting.
If others would like to analyze any of there gear, Download these files. Use the tone to calibrate i/o levels. Create a loopback recording thru the gear & send me the recorded file. I’ll post the results.
Test Files
Test signal (44 kHz 24-bit).wav
Test signal (48 kHz 24-bit).wav
Test signal (96 kHz 24-bit).wav
16BIT48KHZ1KSINEWAVE.wav
Edit: Updated 1-20-09
Results – Click links for full Comparisons

DigiDesign 192 @ 44100
DigiDesign 192 @ 48000
DigiDesign 192 @96000
Have to say the Stock 192’s perform pretty well.
————————————————-
DigiDesign 888/24 @ 44100
DigiDesign 888/24 @ 48000
————————————————-
Lynx Aurora 8 @ 44100
Lynx Aurora 8 @ 48000
Lynx Aurora 8 @ 96000
Performed great.
————————————————-
Lynx L22 @ 44100
Lynx L22 @ 48000
Lynx L22 @ 96000
————————————————-
Lynx L22 vs TC Konnekt 24d @ 96k
Lynx L22 vs TCk24d vs Digidesign 888/24 @ 48k
Surprising how good the 888 D/A actually is. After more testing It’s the A/D thats crap not the D/A.
Lynx L22 vs TCk24d vs MBox @ 44100
————————————————-
M-Audio Audiophile 2496 @ 44100
M-Audio Audiophile 2496 @ 48000
M-Audio Audiophile 2496 @ 96000
————————————————-
————————————————-
Metric Halo Mobile I/O 2882 with 2D @ 44100
Metric Halo Mobile I/O 2882 with 2D @ 48000
————————————————-
————————————————-
TC Konnekt24D @ 44100
TC Konnekt24D @ 48000
TC Konnekt24D @ 96000
————————————————-
TC Studio Konnekt 48 @ 44100
TC Studio Konnekt 48 @ 48000
TC Studio Konnekt 48 @ 96000
————————————————-
Layla3G 3-4 Out 1-2In No Pre.htm
Layla3G 34IO 2444.htm
Layla3G 34IO 2448.htm
Layla3G 34IO 2496.htm Layla3G 34IO 3244.htm
————————————————-
Analog Gear in question = MXP-390 console, 390 with DomII bus comp, & the RNLA
————————————————-
I’ll try to get the data from my TC gear.
Any idea on how to use Rightmark Analyzer to test the gear connected to my Mac?
Any help appreciated.
how about testing the 96i/o vs. the 888/24?
it would be really nice to know how much better the newer stuff is……and well, if it really gets better or not….jeje